STMC today announced a new cryogenic deflashing contract processing service, giving rubber and plastics manufacturers access to its mature low-temperature surface treatment process without buying equipment first.
The service targets three common pain points: low-volume trial production orders that make equipment investment hard to justify, capacity shortfalls during peak season, and uncertainty when a new material is run through cryogenic deflashing for the first time.
Founded in 1998, STMC is a national high-tech enterprise and a Jiangsu “specialized, refined, distinctive and innovative” SME with more than 25 years of experience in low-temperature surface treatment equipment, over 1,000 customers worldwide and a presence in more than 20 countries.
What the service covers
The process combines ultra-low-temperature embrittlement with media blasting: parts are cooled with liquid nitrogen to −196°C, then polycarbonate media in 0.5, 0.8, 1.0 and 1.2 mm sizes is projected at the parts to remove brittle flash without damaging the substrate. It is particularly effective on inner-ring burrs of miniature seals and flash in the crevices of complex geometries.
- Rubber: SI, NBR, EPDM, NR, FKM/FPM, PUR, SBR, BR, CR — seals, O-rings, silicone keypads, dampers, hoses
- Injection molding: PP, ABS, PEEK, PA, PBT, PPS, POM, PVC, PET, PC, PTFE — precision structural parts, connectors, housings, optical parts
- Die casting: aluminium, zinc and magnesium alloys — automotive and 3C metal parts
Free sample trial
Customers send a sample and receive a process test report before any commercial discussion. The five-step protocol covers registration, test plan and machine matching (Jishe 60L, 120L and 180L series), parameter setting for temperature, cycle time and loading method, load-limit testing, and multi-batch stability verification. The report presents three options — best quality, best cost and best overall — with capacity estimates and cost analysis for each. Samples are returned for before-and-after comparison.
Transparent quotation
Pricing is calculated from actual test data rather than a flat rate: material and part weight, batch load, cycle time, nitrogen and media consumption, and whether washing and drying is required (UC-1000 or UC-600 integrated units). Quality criteria and commercial terms are confirmed separately, with unit price improving at higher monthly or batch volumes. Every batch is documented for traceability.
Low-risk scale-up
Customers can move to small-batch production runs before committing, using real volumes and cycle times to verify yield stability and delivery reliability. For customers whose volumes continue to grow, STMC also offers equipment leasing, installment financing, refurbishment and upgrade programs for a smooth transition from contract processing to an in-house line.
Service network
Processing points in Nanjing (headquarters), Dongguan and Chongqing allow customers to ship samples and receive finished parts locally. Technical support responds within 10 minutes, completes fault analysis within 2 hours and provides solutions within 4 hours.
Cryogenic deflashing is not suitable for every part — material hardness, flash thickness and wall thickness all affect the result. STMC’s recommendation is to test a single sample before investing in equipment.
Contact: 400-0500-969 | www.showtan-tech.com | marketing@stmc.group | Zhuyuan South Road 5, Yongning Industrial Zone, Pukou District, Nanjing, Jiangsu (HQ)
Post time: Nov-19-2026
