Case Share
-
Efficient and Precise! 120C Cryogenic Deflashing Machine Delivers Perfect Results for Silicone Rubber Parts, Customers Are Thrilled!
Recently, a silicone rubber parts manufacturer successfully tackled the challenge of removing large flashes that affected product appearance by using the 120C Cryogenic Deflashing Machine. The customer required complete flash removal without damaging the surface texture and protrusions of the pro...Read more -
Washing Machine Rubber Drain Valve Trimming Case
Today, the deflashing involves a rubber plug drain valve made of EPDM material. The product has relatively thick flash, mainly around the parting line. During product testing, the NS-120T model was chosen, which is suitable for deflashing most rubber products. The image below shows a comparison o...Read more -
Multi-type silicone rubber one-stop deflashing
The ten products used for cryogenic deflashing this time are all made of silicone rubber material, with different shapes. Therefore, they need to be tested in batches, as the thickness of the product burrs varies and the parameters set are also different. The before and after trimming comparison ...Read more -
Cryogenic Deflashing of Injection Molded Bolt
Today we are trimming an injection molded part, which has a small volume. The image on the left shows a comparison with a one-yuan coin. The flash is located at the parting line, indicated by the red box in the image. Therefore, we are using a 60L machine for trimming and selecting 0.5mm diameter...Read more -
How to trim rubber O-rings?
The product being tested today is a EPDM rubber O-ring, with burrs at the mold joint. The product has a small volume, as shown in the right image compared to a coin.Before cryogenic deflashing, we first weigh the product and put it in batches. The current testing machine model is 60C, and the ent...Read more -
Cryogenic deflashing of PTFE products
The cryogenic deflashing process for polytetrafluoroethylene (PTFE) products: Today’s deflashed product is a PTFE plastic nut, as shown in the figure below. The burrs mainly exist within the red box. The products will be processed in batches according to weight and undergo deflashing. &nbs...Read more -
How to trim polyurethane damping blocks?
Regarding rubber product trimming technology, it has always been an area worth exploring. STMC has been deeply involved in the cryogenic deflashing machine industry for over 20 years. Along the way, we continuously improved our technology and innovated our products, developing a customer base of ...Read more -
Can the terminal be repaired using a cryogenic deflshing machine?
The cryogenic deflashing machine is suitable for removing burrs from various rubber, injection molded, zinc-magnesium-aluminum alloy parts. STMC has been deeply involved in the cryogenic deflashing machine industry for over 20 years, constantly innovating and becoming a solid support for various ...Read more -
How to trim polyurethane products?
Polyurethane foam materials are mainly divided into soft PU foam, hard PU foam, and spray foam. Flexible PU foam is used for various applications such as cushioning, clothing filling, and filtration. while hard PU foam is mainly used for thermal insulation boards and laminated insulation material...Read more -
How to remove the burrs from rubber pet toys?
In recent years, influenced by the social environment, more and more families are keeping pets, which has led to the flourishing of the pet market and pet supplies market. The various pet toys in pet stores are dazzling, but upon closer inspection, the quality control of pet supplies in the domes...Read more -
How to deflashing O-rongs?
Today, the main test is for an untrimmed rubber O-ring. Before deflashing , the O-rings are neatly arranged on the trimming die. If manual trimming is used, it will be too cumbersome and costly. Due to the small size of this O-ring, we are using the NS-60 L model for deflashing, The 60L model ha...Read more -
How to deflashing the zinc alloy products?
Last month, a customer found us while looking for a zinc alloy edge trimming method. Our response was affirmative, but due to the shape and individual differences in composition of the products, the trimming effect would need to be tested before being demonstrated to the customer.Upon receiving t...Read more
